Enable Wlan Prompt Mode - Cisco 8800 Series Administration Manual

Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Device > Phone and locate the phone.
Step 2 Navigate to the Product Specific Configuration area and set the WLAN Authentication Attempts field.
Step 3 Select Save.
Step 4
Select Apply Config.
Step 5 Restart the phone.

Enable WLAN Prompt Mode

Enable WLAN Profile 1 Prompt Mode if you want a user to sign in to the Wi-Fi network when their phone
powers-up or resets.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select Device > Phone.
Step 2 Locate the phone that you need to set up.
Step 3 Navigate to the Product Specific Configuration area and set the WLAN Profile 1 Prompt Mode field to
Enable.
Step 4 Select Save.
Step 5 Select Apply Config.
Step 6 Restart the phone.
Set Up a Wi-Fi Profile
You can configure a Wi-Fi profile and then assign the profile to the phones that support Wi-Fi. The profile
contains the parameters required for phones to connect to the Cisco Unified Communications Manager with
Wi-Fi. When you create and use a Wi-Fi profile, you or your users do not need to configure the wireless
network for individual phones.
Wi-Fi profiles are supported on Cisco Unified Communications Manager Release 10.5(2) or later.
A Wi-Fi profile enables you to prevent or limit changes to the Wi-Fi configuration on the phone by the user.
We recommend that you use a secure profile with TFTP encryption enabled to protect keys and passwords
when you use a Wi-Fi profile.
When you set up the phones to use EAP-FAST, PEAP-MSCHAPV, or PEAP-GTC authentication, your users
need individual user ids and passwords to sign into the phone.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
Set up Wireless LAN
47