Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Survivable Remote Site Telephony
Feature
Unified Session Presentation
Voicemail
Call Forward All
Speed Dial
Service IRL Programmable Line
Key
To Voicemail (iDivert)
Line Filters
Park Monitoring
Barge
Enhanced Message Waiting
Indication
Directed Call Park
BLF
Hold Reversion
Remote Hold
Meet Me
PickUp

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

76
Supported
Yes
Yes
Yes
Yes
Yes
No
Partial
No
No
No
No
Partial
No
No
No
No
Notes
Conference is the only feature supported
due to other feature limitations.
Voicemail will not be synchronized with
other users in the Cisco Unified
Communications Manager cluster.
Forward state is only available on the phone
that sets the forward because there are no
shared line appearances in SRST mode. The
Call Forward All settings are not preserved
on failover to SRST from the Cisco Unified
Communications Manager, or from SRST
fail-back to the Communications Manager.
Any original Call Forward All still active
on the Communications Manager should
be indicated when the device reconnects to
the Communications Manager after failover.
The iDivert softkey does not display.
Lines are supported but cannot be shared.
The Park softkey does not display.
The Barge softkey does not display.
Message count badges do not appear on the
phone screen.
Only the Message Waiting icon displays.
The softkey does not display.
BLF feature key works like Speed Dial
keys.
Calls remain on hold indefinitely.
Calls appear as Local Hold calls.
The Meet Me softkey does not display.
The softkey causes no action.