Set Ssid Field - Cisco 8800 Series Administration Manual

• On: The Wireless Sign In Access window is displayed. Turning this value on allows you to sign in or
change your wireless user ID and password on the main Applications menu. Otherwise, to change your
sign-in information, navigate to the Security Mode option under Wi-Fi client setup menu and select
either EAP-FAST, PEAP-GTC, PEAP-MSCHAPv2 methods, all of which require sign-in credentials.
• Off: The Wireless Sign In Access window is not displayed.
Default: Off
Step 2
Press Apply.

Set SSID Field

Procedure
Step 1
Scroll to the SSID option, press Select, and enter an SSID.
Step 2 Press Apply.
Set Security Mode Field
Procedure
Step 1 Scroll to the Security Mode option, and highlight the desired value.
Valid values specify:
• None: Access to all access points (APs) without encryption.
• WEP: Open 802.11 authentication that uses Wired Equivalent Privacy (WEP) to encrypt the data.
Specifies access to all APs and authentication through WEP keys at the local AP.
• PSK: Shared key authentication uses AES or TKIP encryption.
• EAP-FAST: Extensible Authentication Protocol Flexible Authentication via Secure Tunneling exchanges
a username and cryptographically secure password with a RADIUS server in the network where a PAC
(Protected Access Credential) establishes a secure tunnel for authentication. EAP-FAST supports WPA
and WPA2.
• EAP-TLS: Extensible Authentication Protocol via Transport Layer Security exchanges a username and
cryptographically secure password with a RADIUS server in the network where a PAC (Protected Access
Credential) establishes a secure tunnel for authentication. EAP-TLS supports WPA and WPA2. For
EAP-TLS authentication, internal Manufacturing Installed Certificate or the User Installed Certificate
is used as User Certificate.
• PEAP(MSCHAPV2): Protected Extensible Authentication Protocol authentication exchanges a username
and cryptographically secure password with a RADIUS server in the network. PEAP is a Cisco proprietary
version of EAP. PEAP supports WPA and WPA2.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
Configure Network Settings
61