Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Supported Security Features
Procedure
Step 1 Press Applications.
Step 2 Choose Admin settings > Security setup > 802.1X Authentication.
Step 3 Configure the Options as described in
Step 4
To exit this menu, press Exit.
802.1X Authentication Options
The following table describes the 802.1X authentication options.
Table 24: 802.1X Authentication Settings
Option
Device
Authentication
Transaction Status

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

158
802.1X Authentication Options, on page
Description
Determines whether 802.1X authentication is
enabled:
• Enabled: Phone uses 802.1X authentication
to request network access.
• Disabled: Default setting. The phone uses
CDP to acquire VLAN and network access.
State: Displays the state of 802.1x authentication:
• Disconnected: Indicates that 802.1x
authentication is not configured on the
phone.
• Authenticated: Indicates that the phone is
authenticated.
• Held: Indicates that the authentication
process is in progress.
Protocol: Displays the EAP method that is used
for 802.1x authentication (can be EAP-FAST or
EAP-TLS).
158.
To change
See Set Device Authentication Field,
on page 159.
Display only. Cannot configure.