Cisco Ip Phone Installation - Cisco 8800 Series Administration Manual

Cisco IP Phone Installation

•
•
•
•
•
•
•
•
Verify the Network Setup
When deploying a new IP telephony system, system administrators and network administrators must complete
several initial configuration tasks to prepare the network for IP telephony service. For information and a
checklist for setting up and configuring a Cisco IP telephony network, see the documentation for your particular
Cisco Unified Communications Manager release.
For the phone to operate successfully as an endpoint in your network, your network must meet specific
requirements.
The phone displays the date and time from Cisco Unified Communications Manager. The time displayed
Note
on the phone can differ from the Cisco Unified Communications Manager time by up to 10 seconds.
Procedure
Step 1 Configure a VoIP Network to meet the following requirements:
• VoIP is configured on your Cisco routers and gateways.
Verify the Network Setup, page 37
Enable Autoregistration for Phones, page 38
Install Cisco IP Phone, page 39
Set Up Phone from Setup Menus, page 41
Set up Wireless LAN, page 43
Configure Network Settings, page 49
Phone Startup Verification, page 65
Configure Phone Services for Users, page 66
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
4
C H A P T E R
37