Philips Q548.1E Service Manual page 38

EN 38 6. Q548.1E LA
Main Menu Sub-menu 1
Miscellaneous
Option number Group 1
Group 2
Store
Initialise NVM
Store
Software maintenance Software events
Hardware events
Operation hours display
Test setting Digital information
Install start frequency
Install end frequency
Default install frequency
Installation
Development file ver- Development 1 file version
sions
Development 2 file version
Upload to USB Channel list
Personal settings
Option codes
Display-related alignment
History list
Download from USB Channel list
Personal settings
Option codes
Display-related alignment
2009-Apr-03
Alignments
Sub-menu 2 Sub-menu 3
Region Europe/AP-PAL-MULTI/Australia
Tuner type HD1816-MK1/TD1716-MK4/
TD1716-MK3/HD1816-MK2
System RC support Off/On
Embedded user manual Off/On
Start-up screen Off/On
Wallpaper Off/On
Hotel mode Off
e.g. "08192.02181.01387.45160"
e.g. "10185.12448.00164.00000"
Display
Clear
Test reboot
Test reboot is to restart the TV.
Display
Clear
0003
QAM modulation: 64-QAM
Symbol rate: 23:29
Original network ID: 12817
Network ID:12817
Transport stream ID: 2
Service ID: 3
Hierarchical modulation: 0
Selected video PID: 35
Selected main audio PID: 99
Selected 2nd audio PID: -1
000
999
Digital only
Digital + Analogue
Display parameters DISPT 4.0.8.11
Acoustics parameters ACSTS 3.0.6.1
PQF - Fixed settings 1
"4.54.34.32.34"
PQS - Profile set 1 "4.57.34.32.34"
PQU - User styles 1 "4.56.34.32.34"
12NC one zip software
Initial main software
NVM version Q5431_0.4.3.0
Flash units SW Q5431_0.16.48.24
Description
Select Region/country.
Select type of Tuner used.
Select System RC support On/Off.
Select Embedded user manual On/Off.
Select Start-up screen On/Off.
Select Wallpaper On/Off.
Hotel mode is Off.
The first line (group 1) indicates hardware options 1
to 4.
The second line (group 2) indicates software options
5 to 8.
Store after changing.
N.A
Select Store in the SAM root menu after making any
changes.
Display information is for development purposes.
Display information is for development purposes.
In case the display must be swapped for repair, you
can reset the "Display operation hours" to "0". So, this
one does keeps up the lifetime of the display itself
(mainly to compensate the degeneration behaviour).
Display information is for development purposes.
Install start frequency from 0 MHz
Install end frequency as 999 MHz
Select Digital only or Digital + Analogue before instal-
lation.
Display information is for development purposes.
Display information is for development purposes.
To upload several settings from the TV to an USB
stick
To download several settings from the USB stick to
the TV.