Dsp Control; D - Pluggable Dsp Blocks - Ashly nX1504 Operating Manual

Operating Manual - nX, nXe, and nXp 150W/75W Power Amplifiers
9.4d DSP Control Tab
All signal processing is done in the DSP control tab, with separate input and output sections and a cross-linking matrix mixer
between. From left to right, each channel in the DSP tab includes the following features:
Input/Output Channel Number
Input/Output Channel Name
Input/Output Mute Button
Input/Output LED
- Shows signal present or clipping for that DSP input or output channel.
Pluggable DSP Blocks
- Six pluggable DSP blocks are available for each input and output. To use, right-click on an empty DSP
block to select one DSP function from the drop-down list. Left-click on the placed DSP function to adjust its parameters, or right-click
on it to bypass, select for sub-preset, copy/paste to another similar block, or delete. Total DSP usage is indicated as a percentage at
the bottom of each input section in the DSP tab. Increasing the number and complexity of applied DSP tools increases the DSP usage.
Total DSP usage cannot exceed 100%. All DSP functions are listed below, with details on the following pages.
1) Dynamics controls
ambient noise compensation is available on outputs only.
2) Gain functions
3) Equalization
- 31 band graphic EQ, 10/6/4/2-band parametric EQ, feedback suppressor (input), FIR filter (output)
4) Crossover functions
HPF and LPF filters are available on both inputs and outputs.
5) Speaker Delay/Delay
At 96kHz sample rate, maximum speaker delay is 10mS and maximum delay is 41ms.
6) Metering
- -60dBu to +20dBu display
7) Signal Generator
- Click on this to use each channel's clear, copy/paste, link, and sub preset functions.
- The user can name each input or output channel.
- Mutes the input or output. Note that only the output mute button lights the front panel mute LED.
- Brick wall limiter (infinite ratio), compressor, autoleveler, ducker, and noise gate.
- Gain, gain with VCA, RD-8C remote control gain, neWR-5 remote control gain
- Four-way, three-way, and two-way crossovers are available on outputs only.
- At 48kHz sample rate, maximum speaker delay is 21mS and maximum delay is 682mS.
- Pink noise, white noise, sine wave
23