Quick Setup For G450 Media Gateway Processor (Mgp) - Avaya G450 Installing And Upgrading

Information Checklists

Quick Setup for G450 Media Gateway Processor (MGP)

Task
Define a Primary
Management
Interface (PMI)
Configure the
ICC-VLAN
Note: By default, the
ICC-VLAN is 1.
Therefore configure
the ICC-VLAN only if
you wish to configure
it for a VLAN other
than 1.
Define the CLI prompt
Define a default
gateway
Create a list of valid
Media Gateway
Controller(s)
Display device
information
292 Installation and Upgrades for the Avaya G450 Media Gateway
CLI Command
Enter the context of the
interface which you want to
set as the Primary
Management Interface
(PMI). For example:
interface vlan
In the context of the
interface, assign an IP
address and subnet mask
to the interface:
ip address
In the context of the
interface, define this
interface as the PMI
pmi
Create a vlan and enter its
configuration context:
interface vlan
In the context of the vlan
interface, set the current
vlan as the icc-vlan:
icc-vlan
Set the VLAN ID of a LAN
port (10/5 or 10/6) to the
VLAN number of the
ICC-VLAN:
set port vlan
hostname
ip default-gateway
set mgc list
show system
Requested Fields
vlan id
IP address
netmask
vlan id
vlan id
module number
port number
hostname
gateway IP address
IP address1
IP address2
IP address3
IP address4
Information to enter