Texas Instruments 880 User Manual page 33

11. To select a code, press the
Accept
key
when the code is printed as ON. To reject
a code, press the Accept key when the
code is printed as OFF. Press the Change
key to change the code from ON to OFF
or OFFto ON.
After you make the last miscellaneous
configuration code selection, the printer
prints the new configuration report
showing your choices.
CNFG: 15; 28; 37; 42; XX; ...
12. Press the Normal key to return to nor-
mal mode or press the Accept key to
print the character set report
(if
optional
character sets are installed).
NOTE
Returning to normal mode in the mid-
dle of the configuration code selec-
tion procedure will cause the printer
to retain all changes made up to that
point.
Refer to Tables 3-1 and 3-2 for the Model 880
Printer configuration codes.
3-11