Cleaning Procedure; Fusing Section; Cleaning Section Of The Fusing Section - Konica Minolta bizhub pro 1100 Maintenance Manual

Fusing section

CAUTION
Be sure to check the cleaning section before you activate the power of the main body.
If you activate the power with the door of the main body closed, the inside of the fusing unit becomes hot. Therefore,
you possibly get burned when you clean near the fusing unit.

)Cleaning section of the fusing section

- Pre-fusing guide plate
- Fusing separating claw/Lw
- Fusing separating claw/Up
NOTICE
- Be careful not to drop any dirt on the paper path when you clean the machine.

)Cleaning procedure

1
Open the right door and left door of the
main body.
2
Activate the main power switch, then activate the sub power switch.
3
Tilt the lever [M4] clockwise.
1-11