Display Setup Screen - Panasonic SD AG-HPX171E Operating Instructions Manual

AV IN/OUT SETUP screen (continued)
Item
DOWNCON MODE
HP MODE
TEST TONE
INT MIC

DISPLAY SETUP screen

Item
ZEBRA DETECT 1
ZEBRA DETECT 
MARKER
SAFETY ZONE
FOCUS BAR
VIDEO OUT OSD
Display
mode
(Camera) Switches down-conversion output mode.
(MCR) SIDE CROP: Crops the right and left edges of the images with the 4:3
aspect ratio.
LETTER BOX: Adds black bands at the top and bottom of the images,
and the images with the 16:9 aspect ratio are displayed in the 4:3
aspect ratio.
SQUEEZE: Select this option for 16:9 aspect ratio images. When
viewed on a 4:3 aspect ratio monitor, images are squeezed horizontally.
(Camera) Selects the sound heard through the headphones.
LIVE:
The sound which has been input from the microphone is output as is.
This setting is selected when delays in the sound are annoying.
RECORDING:
The sound in the status which is to be recorded (the sound
synchronized with the images) is output.
(Camera) Determines whether or not a test tone is output to channels 1, 2, 3 and
4 when BARS is set to ON.
ON: Outputs a test tone to channels 1, 2, 3 and 4.
OFF: Does not output a test tone.
(Camera) Determines whether or not input from the internal microphone is used
during recording.
ON: Uses internal microphone input.
OFF: Does not use internal microphone input.
Display
mode
(Camera) Selects the brightness level of the left-leaning zebra patterns on the
screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%
(Camera) Selects the brightness level of the right-leaning zebra patterns on the
screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
OFF
<Note>
The zebra patterns do not appear if you select OFF.
(Camera) Select ON to display the marker. (Page 41)
ON, OFF
To display the marker, press the ZEBRA button.
(Camera) Sets SAFETY ZONE to ON or OFF.
OFF, 90%, :3, 13:9, 1:9
(Camera) Turns the FOCUS ASSIST bar display ON or OFF.
ON, OFF
When set to ON, the FOCUS ASSIST bar can be displayed.
(Camera) Select ON to output the information displayed on the screen together
(MCR) with the signals from the VIDEO IN/OUT jack.
ON, OFF
Description of settings
Description of settings
___indicates the factory setting.
ENGLISH
E-109