Brother E850TKW User Manual page 57

Printing a Tube or Label Using the P-touch Keyboard
d
Select the style using the
Note
• When [Text Size] is selected, the total text size is modified to fit within the tube.
• When [Text Width] is selected, the text width will be reduced to the size of the [x 1/2] setting. (If further
size reduction is needed to fit the text into the selected tube length, the total text size will be modified after
reducing the text width to the [x 1/2] setting.)
e
Press the OK or Enter key to apply the settings.
Note
• To return to the previous step, press the Esc key.
• To set the style as the default setting for [Text Size], press the Space key.
Adjusting the Tube Print Settings
You can specify the detailed settings for printing tubes.
a
Select [Settings] in the Home screen using the
key.
b
Select [Tube Adjustment] using the
c
Select a setting you want to adjust using the
The available settings are as follows (factory settings are shown in bold):
Cut Depth

Adjusts the depth of half cuts.
-3, -2, -1, 0, 1, 2, 3
 Print Speed
Faster Speed, Better Quality
Note
• The [Better Quality] mode can improve the print result when printed characters are faint.
• If you use the P-touch in an environment with a temperature of 20°C or lower, we recommend setting [Print
Speed] to [Better Quality].
 Print Density
-3, -2, -1, 0, 1, 2, 3
Feeding Pressure

Soft, Normal, Strong
 Adjust Length
0.0 mm to +30.0 mm (0.1 mm increments)
or key.
,
or key, and then press the OK or Enter key.
or
, or key, and then press the OK or Enter
key, and then press the OK or Enter key.
2
2
47