Brother E850TKW User Manual page 51

Printing a Tube or Label Using the P-touch Keyboard
Cable Flag
Labels of this type can be wrapped around a cable or wire, and both ends of the label stick together to form
a flag. The text on flag labels is printed on both ends of the label, leaving a blank space in the middle that
wraps around the cable.
1 Flag length at least 5 mm
 Layout: (same text on both sides),
 Flag Length: 30 mm, 10-200 mm
 Cable Diameter: 6 mm, 3-90 mm
 Orientation:
Horizontal
1
1 Flag length
2 Cable circumference
Note
• You can enter up to two barcodes when
• We recommend using Flexible ID Tape for "Cable Flag" labels.
• Labels made with Flexible ID Tape are not designed for use as electrical insulation.
1
(Horizontal), (Vertical)
2 1
(different text on each side)
1
is selected in flag layout.
Vertical
2 1
2
2
41