Brother E850TKW User Manual page 106

Changing the P-touch Settings
c
Check that the P-touch you want to configure appears next to [Printer]. If a different printer appears,
select the P-touch you want from the drop-down list.
Note
If only one P-touch is connected, it is unnecessary to make a selection because only that P-touch is
available.
d
Select the setting you want to change, and then specify or change the settings in the dialog box.
For more information on the settings dialog boxes, see Communication Settings on page 97 or Device
Settings on page 110.
e
Click [Apply] - [Exit] in the settings dialog box to apply the settings to the P-touch.
f
Click [Exit] in the main window to finish specifying settings.
Important
Use the "Printer Setting Tool" to configure the P-touch only when the P-touch is in standby. The P-touch
may malfunction if you try to configure it while it is handling a job.
6
96