Factory Default Settings - Juniper srx550 Setup Manual

Gather Configuration Information
Gather information about your network and the configuration settings that you
will use to configure the device.
Required
Device name
Root authentication
Optional
NTP server name or IP address
Licenses
Internet zone
Static IP (provided by ISP)
Port number
DMZ
Network IP address
Port number
Internal zone
Name of the zone
Network IP address
Port number
DHCP server
Security policies
Remote client IP pool range
Destination NAT
Internal zones for which source NAT has been added
IP address or hostname
How to Set Up Your SRX550 High Memory Services Gateway
Factory-Default Settings
Security Policies
Source Zone Destination Zone
trust untrust
trust trust
untrust trust
NAT Rules
Source Zone Destination Zone
trust untrust
Interfaces
Port Label Interface
0/0 ge-0/0/0
0/1 ge-0/0/1
0/2 ge-0/0/2
0/3 ge-0/0/3
0/4 ge-0/0/4
0/5 ge-0/0/5
Initial Configuration Process
Connect
Power On
the Grounding
the Device
Cable
Connect the
Verify the
Management Device
Settings
to the Ethernet Port
Policy Action
permit
permit
deny
Policy Action
Source NAT to untrust zone
interface
Security Zone DHCP State
untrust Client
trust Server
trust Server
trust Server
trust Server
trust Server
Connect the
Management Device
to the Console Port
Configure
Root
Authentication
IP Address
Dynamically
assigned
192.168.1.1/24
192.168.2.1/24
192.168.3.1/24
192.168.4.1/24
192.168.5.1/24
Log in
to the CLI
2