Removing The Hard Disk Drive - Clevo P170EM Service Manual

Disassembly
Figure 2
HDD Assembly
Removal
a. Locate the HDD bay
cover and remove the
screws.
b. Remove the hard disk
bay cover by levering the
cover at point 3 .

4.Hard Disk Bay Cover
• 2 Screws

2 - 6 Removing the Hard Disk Drive

Downloaded from www.Manualslib.com
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, and remove the battery
2. Locate the hard disk bay cover and remove screws
3. Remove the hard disk bay cover
a.
1
3
2
You have backed up any data you want to keep from your old HDD.
You have all the CD-ROMs and FDDs required to install your operating system and programs.
If you have access to the internet, download the latest application and hardware driver updates for the operating system you plan
manuals search engine
(page 2 - 5).
- (Figure 2a
1 2
by levering the cover at point
4
6
b.

HDD System Warning
New HDD's are blank. Before you begin make sure:
to install. Copy these to a removable medium.
)
.
(Figure 2b ) .
3
3
4