Update Procedures - Mitsubishi Electric AE-200A Instruction Book

6-3-2. Update procedures

Note: The software cannot be downgraded to an earlier version.
(1) Remove the controller cover, and insert a USB memory device in which the update file is stored to the USB
port.
Note: Do not remove the USB memory device while the software is being updated.
Note: The USB memory device may not be recognized if you insert and remove it within a short time. If this happens, reset
the AE-200/AE-50.
(2) Touch [
] to display the login window.
(3) Enter the maintenance user name and the password in the login
window, and touch [Login]. (Default user name: initial, Default
password: init)
(4) Touch [Maintenance] in the menu bar, and then touch [Update].
Touch [Software Update] to read the update file.
(5) Touch [OK]. A software update process starts.
Note: It takes about four minutes to complete the update.
Note: The Status LED will blink in blue while the software is being updated.
Note: Do not turn off the power to the AE-200/AE-50 while the software is
being updated.
(6) The AE-200/AE-50 will reboot after the update is complete.
Disconnect the USB memory device.
WT07982X03
87