Ae-50/Ew-50 Controller - Mitsubishi Electric AE-200A Instruction Book

(4) Touch the right triangle button to display the [Groups] tab, and
touch it.
Referring to section 5-2-7, make group settings, and then
touch [Save Settings].
(5) Make the following settings, as required.
● Block settings (See section 5-2-8 "Blocks".)
● Floor layout settings (See section 5-2-9 "Floor Layout".)
(6) Touch the right triangle button to display the [Network] tab, and
touch it.
Referring to section 5-2-6, make necessary settings, and then
touch [Save Settings].
Note: When the LAN settings are changed, AE-200 will reboot, and
the step (7) below will be skipped.
(7) Touch [
] at the right top of the screen.
A message "Are you sure you want to return to the Monitor
/ Operation screen?" will appear. Touch [Yes] to move to the
[Monitor/Operation] screen.
Percentages of startup process completion will appear.
The initial settings are completed.
Note: When no communication errors occur, the startup process will
take about two or three minutes after the message appears.
When an error is occurring, it may take about five minutes.
(8) Open the [Date and time] screen, and touch [Save Settings] to
reflect the current date and time to each unit.
WT07982X03
52