Manual Setup; Connection Test - Sharp AQUOS LX959H Operation Manual

Network function
w Manual setup
• You can select the connection type (wired/wireless),
choose the wireless setup mode, and set the IP
address.
• Follow the on-screen instructions to complete the
network setup.
Wireless installation
Go to "Menu" s "Setup" s "View setting" s
1
"Network setup" s "LAN setting" s "Manual
setup" s "Yes".
"Connection type" s "Wireless" s "OK".
Go to "Wireless setup" s "Change", and then
2
press ? .
Press a / b to select "WPS push button", and
3
then press ? .
• If your router/access point does not support WPS
(Wi-Fi Protected Setup), select "Selecting wireless
network" and follow the on-screen instructions and
the operation manual of the router/access point.
• To establish the connection manually, select
"Registering Wireless network". Follow the on-
screen instructions and the operation manual of
the router/access point.
• To establish the connection manually, select "WPS
PIN code". Follow the on-screen instructions and
the operation manual of the router/access point.
Select "Next" to proceed.
4
Press the WPS button on the router/access
5
point. When you press the WPS button, a
progress bar will appear on the display. Wait until
the connection is established.
Select "OK" when the connection details are
6
displayed.
• If you have failed to connect to the internet in
the above operation, an error message will
appear.
76
Wired installation
Go to "Menu" s "Setup" s "View setting"
1
s "Network setup" s "LAN setting".
2 Press a / b to select "Manual setup", and then
select "Yes", press ? .
• Go to "Connection type" s "Wired" s "OK".
Press a/b to select "IP setup", press ?,
3
select "change" and then press ?.
• Set "Get the IP address automatically" and
"Get the DNS address automatically" to
"Yes", to finish the network setup.
• The wired network is now established
automatically. If you want to manually
change the settings, go to "Menu" s "Setup"
s "View setting" s "Network setup" s
"LAN setting" s "IP setup" and follow the
on-screen instructions and the operation
manual of the router.
4
Select "OK" , and then select "Finish".
• If you have failed to connect to the Internet
in the above operation, an error message will
appear.
NOTE
• To connect your TV to the internet, you must have a
broadband internet connection.
• If your access point is set to a stealth mode (that
prevents detection by other devices), you may not
be able to establish a connection. In this case,
disable the stealth mode on the access point.
• If you want to change the IP settings manually, go
to "Menu" s "Setup" s "View setting" s "Network
setup" s "IP setup" and follow the on-screen
instructions and the operation manual of the router.
• As there are lot of formats in the internet, some
formats may not be supported by this TV unit.
w Connection test
• You can test the network connection status.
NOTE
• Successfully passing the connection test does not
guarantee that you can connect to all third-party services.
--- --- --- ---
--- --- --- ---
--- --- --- ---