Labelling Input Sources; Skipping An Input; Colour System Settings; Channel Selecting Effect - Sharp AQUOS LX959H Operation Manual

Settings when using external devices
TV TV

Labelling input sources

You can assign each input source a label as you
prefer.
Press b (INPUT SOURCE) to select the
1
desired input source.
Press MENU and the MENU screen displays.
2
Press b / c / d to select "Option".
3
Press a / b to select "Terminal setting", and
4
then press ? .
Press a / b to select "Input label", and then
5
press ? .
Select each character of the new name for the
6
input source with using the software keyboard.
(See page 28.)
Repeat the above until the name is fully spelt
7
out, and then press MENU .
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, select "Done".
NOTE
• You cannot change labels if the input source is "ATV",
"DTV", "Multimedia" , "Bluetooth", "Miracast" or "Home
network".

Skipping an input

This setting allows you to skip an input on the "Input
skip" menu.
Press MENU and the MENU screen displays.
1
Press b / c / d to select "Option".
2
Press a / b to select "Terminal setting", and
3
then press ENTER.
Press a / b to select "Input skip", and then
4
press ENTER.
Press a / b to select the Input you wish to
5
skip.
CH list
62
EXT MEDIA EXT MEDIA
INFO INFO
MENU MENU
GUIDE GUIDE
SLEEP SLEEP
Menu
Setup
:Back Τerminal setting
Input skip
HDMI1
[No]
HDMI2
Yes No
Skip input selection
HDMI4
[No]
INPUT5
[No]
Press c / d to select "Yes".
6
NOTE
• When you select "ATV", "DTV", the skip function works only
when using the INPUT

Colour system settings

You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
Press b / c / d to select "Option".
2
Press a / b to select "Colour system", and
3
then press ? .
Press a / b to select a compatible video signal
4
system of your equipment, and then press ? .
NOTE
• Factory preset value is "Auto".
• If "Auto" is selected, colour system for input signal is automatically
set. If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• You can choose from "Auto", "PAL", "SECAM" and "NTSC3.58" in
the "ATV" mode.
• "Colour system" is selectable only when inputting an composite
signal.

Channel selecting effect

This function sets a screen effect when choosing or
changing channels.
Press MENU and the MENU screen displays.
1
Press b / c / d to select "Option".
2
Press a / b to select "Screen effect" and then
3
press ? .
Press a / b to select "Channel selecting
4
effect".
Press c / d to select "Yes".
5
button on the TV.
Auto
PAL
SECAM
NTSC3.58
NTSC4.43
PAL-60