Network Function; Connecting To The Network; Wired Installation; Wireless Installation - Sharp AQUOS LX959H Operation Manual

Network function

Connecting to the Network

To enjoy internet services, you need to connect the TV to
a router with a high speed connection to the internet. You
can also connect the TV to your Home network server
through a router or access point. The TV connection to
the router can either be wired or wireless.
NOTE
• If you choose a wired connection to the router, you need a
LAN cable (commercially available).
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask your
internet service provider or telephone company.
• A wired and wireless connection cannot be used at the
same time. Use only one of the connection types.
• A stable connection speed is required to play back streaming
content, otherwise you may not be able to watch normally.
• As there are lot of formats in the internet, some formats
may not be supported by this TV unit.

Wired installation

Switch on the router (commercially available). Refer to the
router's operation manual for switching on.
Connect the LAN terminal on the TV to the router
(commercially available) with a LAN cable (commercially
available).
w Wired connection overview
Network
LAN cable
(commercially available)
Router(commercially available)
w How to connect
Router
LAN cable
LAN
(commercially available)

Wireless installation

Switch on your router before starting the network installation.
• After connected, please refer to "LAN setting" for setting
wireless connection (see this page and next page)
H Wireless connection overview
Network
Wireless LAN
router/access point
• This TV has received the following certifications.
• A wireless LAN connection and performance cannot
• Make sure the firewalls in your network allows access
• Operations cannot be guaranteed when used with
• A wireless LAN access point is required to connect
• A stable connection speed is required to play back
• As there are lot of formats in the internet, some
• Before transferring to a third party or disposal, be

LAN setting

Go to "Menu" s "Setup" s "View setting" s "Network
setup" s "LAN setting".
LAN terminal
w Easy setup
Only the WPS mode is available for wireless connection
setup. "Manual setup" is possible for other wireless
connections.
• Follow the on-screen instructions to complete the
• A connection test is performed after the setup is complete.
• For instructions on how to check whether your
NOTE
– Wi-Fi CERTIFIED™ (certification program from the
Wi-Fi Alliance®)
– Wi-Fi Protected Setup™ (certification program
from the Wi-Fi Alliance®)
be guaranteed for all residential environments. In the
following cases, the wireless LAN signal may be poor
or drop, or the connection speed may become slower.
– When used in buildings made with concrete,
reinforced steel, or metal.
– When placed near objects that obstruct the signal.
– When used with other wireless devices that emit
the same frequency.
– When used in the vicinity of microwave ovens and
other devices that emit a magnetic field, electrostatic
charge, or electromagnetic interference.
to the TV wireless connection.
access points that do not have Wi-Fi® certification.
the TV to the Internet using a wireless LAN. See the
operation manual of your access point for setup.
streaming content. Use a wired connection if the
wireless LAN speed is unstable.
formats may not be supported by this TV unit.
sure to initialise the wireless LAN settings.
Press a / b to select "Easy setup", and then
1
select "Yes", press ? .
Select "Wired" or "Wireless", and then press
2
? .
network setup.
NOTE
router supports the WPS function and how to locate
the WPS button, see the main body of your router or
refer to its operation manual.
75