Philips Baby Monitor SBCSC363 Instructions For Use Manual page 3

A
4
3
2
1
9
B
2
3
1
4
11
10
5
6
7
8
5
6
7
8
9V DC
9V DC
9
A-1 Microphone -------------------------
A-2 Power light --------------------------
GB
A-3 Transmit light -----------------------
A-4 Power pushbutton ----------------
A-5 Microphone sensitivity -----------
A-6 DC power supply socket --------
A-7 Channel selection switch --------
A-8 Battery compartment cover -----
A-9 AC power adapter ----------------
B-1 Power light --------------------------
B-2 Loudspeaker ------------------------
B-3 Loudspeaker Volume control /
Off switch -------------------------
B-4 Power base -------------------------
B-5 Battery compartment cover -----
B-6 Channel selection switch --------
B-7 Belt clip ------------------------------
B-8 DC power supply socket --------
B-9 AC power adapter ----------------
B-10 Audible warning switch ----------
B-11 Power base light -------------------
B
ABY UNIT
high-sensitivity microphone
lights when unit is powered; flashes when batteries are low
lights when a sound is being transmitted
push this button to switch the unit on or off
set the level at which the microphone will pick-up sounds
plug mains adapter connector into this socket
select channel A or B (whichever has least interference)
unscrew and unclip to insert batteries
plug into AC mains socket and into DC power supply socket
P
ARENT UNIT
lights when unit is powered; flashes when batteries are low
provides clear sound
• set loudspeaker level;
• switches off the power to the unit completely
place unit in base to operate it on mains power
unscrew and unclip to replace batteries
select channel A or B (same as Baby unit)
handy clip for carrying the unit
plug mains adapter connector into this socket
plug into AC mains socket and into DC power supply socket
sets audible link alarm on or off
lights when unit is in the base
3