Page 4
Power supply – Battery pack; rechargeable NiMH for small Parent Unit (included); – Optional batteries 4 x 1.5V; AA alkaline for Baby Unit and big Parent unit (not included); – AC power adapter 230V AC, 50 Hz (three included): - Output voltage 9V DC, 200mA. Only use the AC power adapter included or a type that complies with safety standard EN60950 and that has the following specification: 9 Volt DC / 200mA.
Page 5
(Parent unit). clockwise (B-4, C-4). If you want to use batteries, remove the battery compartment cover (A-7) using a screwdriver. Insert four 1.5V, AA batteries (not included; we recommend non-chargeable Philips Alkaline batteries), noting Batteries are low. Recharge batteries. the + and - configuration inside the battery compartment. Put the cover back in place and tighten screw.
Page 6
Both Parent units can be used at the same time. To use the units to listen to your baby: All units use anti-interference technology to reduce the chance of interference from other signals. If • Position the Baby unit at least 1 metre away from the baby so that the microphone (A-1) can pick up interference does occur or if sound reception is poor, try switching all units to the other channel to baby’s sounds.