Service
(continued)
11 . Use screwdriver to orient auger shaft to align with motor
shaft keyway (Fig . 22 .1) .
12 . Install key into keyway (Fig . 22 .2) .
13 . Install spacer, ensure that key is captured in slot
(Fig . 23 .1)
14 . Insert screwdriver into groove of auger shaft and pry shaft
outwards (Fig . 24 .1) .
15 . Insert retainer into groove (Fig . 24 .2), ensure that retainer
is aligned with hole in spacer .
18
Dispenser and Ice Machine 230 V/50 Hz, Rear Drain
Fig . 22
2
1
Fig . 23
1
Fig . 24
1
2