Follett E7CI100A Installation, Operation And Service Manual page 14

Service
(continued)
10 . Unplug the gear motor (three connectors) (Fig . 10) .
11 . Remove ground screw connection .
12 . Remove gear motor:
§ Remove M6 allen screw, retainer, spacer and key (Fig . 11 .1) .
§ Remove two M6x90 allen screws (Fig . 11 .2) .
§ Pull gear motor from auger (Fig . 11 .3) .
§ Remove main housing insulation (Fig . 11 .4) .
13 . Remove all traces of petro-gel from auger shaft .
14 . Remove compression nozzle:
§ Loosen hose clamp (Fig . 12 .1) .
§ Remove transport tube (Fig . 12 .2) .
14 Dispenser and Ice Machine 230 V/50 Hz, Rear Drain
Fig . 10
Fig . 11
2
3
1
2
Fig . 12
2
4
1