Headlamp High/Low-Beam Changer; Windshield Wipers - Chevrolet 2009 Kodiak Owner's Manual

Headlamp High/Low-Beam Changer

To change the headlamps from low to high beam or
high to low beam, pull the multifunction lever all the way
toward you, then release it.
3-8
When the high beams
are on, this light on the
instrument panel cluster
will also be on.

Windshield Wipers

9 (Off): Turns off the windshield wipers.
8
(Mist): For a single wiping cycle. Hold it there until
the wipers start, then let go. The wipers will stop
after one cycle. If more wipes are needed, hold the
band on mist longer.
The wiper speed can be set for long or short delays
between wipes. Turn the band to select the delay time.
The farther the band is turned upward or downward,
the longer or shorter the delay.
The windshield wipers are
controlled by turning the
band with the wiper symbol
on it.