Chevrolet 2009 Kodiak Owner's Manual page 130

Increasing Speed While Using Cruise
Control
There are two ways to go to a higher speed:
•
Use the accelerator pedal to get to the higher
T
speed. Press at the end of the lever, then
release the button and the accelerator pedal. The
vehicle now cruises at the higher speed.
•
Move the cruise switch from
until the desired speed is reached, and then
release the switch. To increase the vehicle speed in
small amounts, move the switch briefly to
Each time this done, the vehicle goes about 1 mph
(1.6 km/h) faster.
3-12
R S
to . Hold it there
S
.
Reducing Speed While Using Cruise
Control
T
Press at the end of the lever until the lower speed
desired is reached, then release it.
To slow down in small amounts, tap the button briefly.
Each time this is done, the vehicle goes about 1 mph
(1.6 km/h) slower.
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase the vehicle speed.
When you take your foot off the pedal, your vehicle will
slow down to the cruise control speed you set earlier.