Replacing The Operator Information Panel Assembly - Lenovo x3550 M5 Installation And Service Manual

Step 6. If you are instructed to return the operator information panel assembly, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.

Replacing the operator information panel assembly

Use this information to replace the operator information panel assembly.
To install the operator information panel, complete the following steps.
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 116.
Step 2. For the eight 2.5-inch hot-swap or simple-swap and ten 2.5-inch hot-swap hard disk drive server
configuration, install the operator information panel assembly into the media cage. For the four
3.5-inch" hot-swap or simple-swap hard disk drive server configuration, go to step 4.
Note: Refer to the illustration that applies to your particular server configuration.
Eight 2.5-inch hot-swap or simple-swap hard disk drive server configuration:
Operator information panel
Figure 167. Operator information panel assembly installation into media cage for eight 2.5-inch hot-swap or
simple-swap hard disk drive server configuration
244
Lenovo System x3550 M5 Installation and Service Guide