Replacing The Operator Information Panel Assembly - Lenovo x3650 M5 Installation And Service Manual

Operator information
panel assembly
Figure 224. Operator information panel removal
Step 6. If you are instructed to return the operator information panel assembly, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.

Replacing the operator information panel assembly

Use this information to replace the operator information panel assembly.
To install the operator information panel, complete the following steps.
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 289.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3. Remove the top cover (see "Removing the top cover" on page 143).
Step 4. Slide the operator information panel into the server until it clicks into place.
264
Lenovo System x3650 M5 Installation and Service Guide
1
2
Release latch