Led Indicator - Panasonic KX-HNC800 Installation Manual

LED indicator

You can use the LED indicator to confirm the camera's status.
Indicator
Off
Blue, lit
White, lit
White, blinking quickly Camera is searching for wireless router
Green, lit
Green, blinking slowly
Green, blinking
Red, lit
Red, blinking slowly
Red, blinking
*1 You can configure the camera so that its LED indicator does not light
during normal operation or when motion is detected. For more
information, refer to the User's Guide (page 31).
For assistance, please visit http://shop.panasonic.com/support
HNC800_(en_en)_0902_ver.220.pdf
Status
No power, or LED indicator is turned off
Normal operation, connected to wireless
*1
router , privacy shutter is open
Normal operation, connected to wireless
*1
router , privacy shutter is closed
Initial setup required
Initial setup is in progress with mobile device
connected
Initial setup is starting
Motion detected
Live images are being viewed or recorded, or
camera is starting up
Device malfunction
15
*1
, or camera is starting up
Setup
*1
15
2016/09/05 17:54:30