Figure 4.12 Removing The Bracket From The Odd Drive; Disassembling The Odd Drive; Assembling The Odd Drive - Toshiba Satellite A350 Maintenance Manual

4 Replacement Procedures

Disassembling the ODD Drive

NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or
replace the ODD drive only if it fails.
Disassemble the ODD drive according to the following procedures and Figure 4.12.
1. Remove two M2×2.5 screws.
2. Remove the bracket.
M2X2.5＊2

Assembling the ODD Drive

Assemble the ODD drive according to the following procedures.
1. Seat the bracket in the correct position.
2. Secure them with two M2×2.5 screws.
Satellite A350 Maintenance Manual
Downloaded from www.Manualslib.com
.
Figure 4 12 Removing the bracket from the ODD drive
manuals search engine
Error! Style not defined. Error! Style not defined.
4-22