Toshiba Satellite A350 Maintenance Manual page 101

2 Troubleshooting Procedures
65
To determine if the computer's built-in Felica is functioning properly, perform the following
procedures. Figure 2-25 outlines the process. Start with Procedure 1 and continue as
instructed.
Procedure 1
The Felica is connected via the Felica FPC to the system board. Make sure the Felica FPC
cable is firmly connected to the Felica and system board. Refer to Chapter 4, Replacement
Procedures, for instructions on how to disassemble the computer and then perform the
following checks.
If any of the connections are loose, reconnect firmly. If any of the connections is damaged, or
there is still an error, go to Procedure 2.
Procedure 2
The Felica unit or FPC may be defective or damaged. Replace each with a new one following
the steps in Chapter 4. If the Felica is still not functioning properly, replace the system board
with a new one following the steps in Chapter 4.
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
Downloaded from www.Manualslib.com
Procedure 1: Felica connection check
Procedure 2: Felica replacement check
Felica connection check
Felica replacement check
manuals search engine
65