Toshiba Satellite A350 Maintenance Manual page 99

2 Troubleshooting Procedures
63
To determine if the computer's E-SATA system is functioning properly, perform the
following procedures. Figure 2-24 outlines the process. Start with Procedure 1 and continue
Procedure 1
Connect an E-SATA device to the computer's E-SATA port, then boot the computer for
Windows Vista. The computer should automatically detect the E-SATA device. Check
whether the device can transmit data to the computer.
If the device is able to communicate with the computer, the problem may be intermittent or
connections may be faulty. Go to Procedure 2.
If communication is impaired, there may be a faulty connection. Go to Procedure 3.
Procedure 2
Run the Diagnostic Program, which will automatically execute the E-SATA port test for
transmission, Tests and Diagnostics for more information on how to run the program.
If an error is located, go to Procedure 3. If an error does not occur, the E-SATA port is
functioning properly.
Procedure 3
The transmission cable may be damaged or the connections may be loose. Perform Check 1:
Check 1
Check 2
Check 3
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
Downloaded from www.Manualslib.com
Figure 2-24 E-SATA troubleshooting process
with the other procedures as instructed.
Procedure 1: E-SATA device check
Procedure 2: Diagnostic check
Procedure 3: Connection and replacement check
E-SATA device check
Diagnostic check
Connection and replacement check
Make sure the transmission cable is firmly plugged into both the E-SATA -
compatible device and the E-SATA port of the computer. If the cable is connected
correctly, go to Check 2.
Make sure the E-SATA port is firmly secured to the system board of the
computer. If the malfunction persists, go to Check 3.
The transmission cable may be damaged. Replace with a good cable. If the
malfunction persists, go to Check 4
manuals search engine
63