Toshiba Satellite A350 Maintenance Manual page 85

2 Troubleshooting Procedures
49
To determine if the computer's CRT port is functioning properly, perform the following
procedures. Figure 2-18 outlines the process. Start with Procedure 1 and continue as
instructed.
Procedure 1
The CRT cable may be damaged or the connections may be loose. Perform Check 1:
Check 1
Check 2
Check 3
Procedure 2
The CRT set may be faulty. Perform Check 1:
Check 1
Check 2
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
Downloaded from www.Manualslib.com
Procedure 1: CRT connection check
Procedure 2: CRT set check
CRT connection check
Make sure CRT cable is firmly plugged into both the CRT set and the CRT port
of the computer. If the cable is connected correctly, go to Check 2.
Make sure the CRT port is firmly secured to the system board of the computer. If
the malfunction remains, go to Check 3.
The CRT cable may be damaged. Replace with a good cable. If the malfunction
remains, go to Procedure 2.
CRT set check
Try using the set for CRT reception. If it does not work, the set may be damaged.
If the set does work, perform Check 2.
Try connecting a different CRT to the computer. If the replacement CRT works,
the original set may be damaged. If the replacement set does not work, the system
board may be damaged. Replace it with a new one following the instructions in
Chapter 4.
manuals search engine
49