Figure 4.7 Removing The Bracket From The Odd Drive; Installing The Odd Bay Module; Disassembling The Odd Drive - Toshiba Satellite L500D Maintenance Manual

Error! Use the Home tab to apply
Home tab to apply

Installing the ODD Bay Module

Install the ODD bay module according to the following procedures.
1. Place the ODD bay module in the correct position and slide it in.
2. Push it in until it meets the end.
3. Secure the ODD bay module with one M2x8 screw.

Disassembling the ODD Drive

NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or
replace the ODD drive only if it fails.
Disassemble the ODD drive according to the following procedures and Figure 4.7.
1. Remove two M2x3 screws.
2. Remove the bracket.
M2x3*2
Satellite L500D Maintenance Manual
2 to the text that you want to appear here. Error! Use the
2 to the text that you want to appear here.

Figure 4.7 Removing the bracket from the ODD drive

4 Replacement Procedures
4-19