Camera And Photos; Taking A Photo; Applications; Sending And Receiving Data Wirelessly - Garmin RINO 750 Owner's Manual

Camera and Photos

NOTE: This feature is available only for models that include a
camera.
When you take a photo, the geographic location is saved with
the photo information. You can navigate to the location.

Taking a Photo

1
From the app drawer, select Camera.
2
Turn the device horizontally or vertically to change the
orientation of the photo.
3
If necessary, select to turn on the flash.
TIP: You can select Auto to use the flash only when the
camera detects a low light scene.
4
If necessary, use two fingers on the touchscreen to zoom in
or out.
5
Hold to focus and hold the device still.
A white frame appears on the screen. The device focuses on
the object inside of the frame. When the photo is in focus, the
frame turns green.
6
Release to take a photo.

Applications

Sending and Receiving Data Wirelessly

Before you can share data wirelessly, you must be within 3 m
(10 ft.) of a compatible device.
Your device can send and receive data when paired with
another compatible device using Bluetooth or ANT+
technology. You can share waypoints, geocaches, routes,
tracks, photos, and custom maps.
1
From the app drawer, select Share Wirelessly.
2
Select an option:
• Select Send, and select a type of data.
• Select Receive to receive data from another device. The
other compatible device must be attempting to send data.
3
Follow the on-screen instructions.

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified range
of a particular location.
1
From the app drawer, select Proximity Alarms > Create
Alarm.
2
Select a category.
3
Select a location.
4
Select Use.
5
Enter a radius, and select
When you enter an area with a proximity alarm, the device
sounds a tone.
TIP: You can configure separate alarm tones for when you enter
and leave an area.

Calculating the Size of an Area

1
From the app drawer, select Area Calculation > Start.
2
Walk around the perimeter of the area you want to calculate.
3
Select Calculate when finished.

Viewing the Calendar and Almanacs

You can view device activity, such as when a waypoint was
saved. You can also view daily almanac information for the sun
and moon, and hunting and fishing.
12
wireless
®
.
1
From the app drawer, select an option:
• To view device activity for specific days, select Calendar.
• To view the sunrise, sunset, moonrise, and moonset
information, select Sun and Moon.
• To view the predicted best times for hunting and fishing,
select Hunt and Fish.
2 If necessary, select or
3 Select a day.

Setting an Alarm

1
From the app drawer, select Alarm Clock.
2
Select and to set the time.
3
Select Turn Alarm On.
4
Select an option.
The alarm sounds at the selected time. If the device is off at
the alarm time, the device turns on and sounds the alarm.

Starting the Countdown Timer

1
From the app drawer, select Alarm Clock >
2
Select and to set the time.
3
Select Start Timer.

Opening the Stopwatch

From the app drawer, select Stopwatch.

Satellite Page

The satellite page shows your current location, GPS accuracy,
satellite locations, and signal strength.

Changing the Satellite View

1
From the app drawer, select Satellite.
2
Select .
3
Select an option:
• To orient the satellite view with your current track toward
the top of the screen, select Track Up.
• To show a unique color for each satellite and its signal
strength bar, select Multicolor.

Turning Off GPS

You can turn off GPS on your device to stop tracking your
location.
1
From the app drawer, select Satellite.
2
Select > Use With GPS Off.

Simulating a Location

You can use the device with GPS off to perform maintenance on
waypoints and routes, or to conserve battery life. You can set
the location manually to view your current location on the map.
1 From the app drawer, select Satellite >
Off.
2
Select > Set Location On Map.
3
Select a location.
4
Select Use.
Controlling a VIRB
Before you can use the VIRB remote function, you must enable
the remote control setting on your VIRB camera. For more
information, see the owner's manual for your VIRB camera.
1
Turn on your VIRB camera, and enable the remote control
setting.
2
On your device, from the app drawer, select VIRB Remote.
3
Wait while the device connects with your VIRB camera.
to view a different month.
> Timer.
> Use With GPS
Action Camera
®
Camera and Photos