Page 1
Rino ® owner’s manual August 2011 190-01183-03_0B Printed in Taiwan...
Page 2
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Settings21 Radio Page Status Indicators 9 Display Settings 22 Waypoints and Tracks ����������10 Setting the Device Tones 22 Settings22 Waypoints 10 Tracks Settings 23 About Sharing Data 11 Changing the Units of Measure 24 Tracks 11 Rino 650 Owner’s Manual...
Page 4
Viewing the Calendar and Almanacs 30 Calculating the Size of an Area 31 Setting an Alarm 31 Opening the Stopwatch 31 Device Information ���������������32 Updating the Software 32 Viewing Device Information 32 Specifications 32 About the Batteries 33 Rino 650 Owner’s Manual...
Page 5
6. Record a track (page 12). Select to send out a call tone ➊ 7. Navigate to a destination (page 13). If enabled (page 8), the call 8. Calibrate the compass (page 14). key sends your position when released Rino 650 Owner’s Manual...
This product contains a lithium-ion 2. Align the metal contacts on the battery. To prevent personal injury or battery pack with the metal contacts device damage, store the device out of on the back of the device. direct sunlight. Rino 650 Owner’s Manual...
It may take 30 to 60 seconds to acquire 3. Plug the small end of the AC signals. charger into the two-pin connector ➊ 1. Go outdoors to an open area. 2. Turn on the device. 3. Wait while the device searches for satellites. Rino 650 Owner’s Manual...
To change the Note: This action does not lock the backlight timeout, see page keys. • Select 1. Select • Touch the screen. 2. Select Lock Screen. Alerts and messages also activate the backlight. Rino 650 Owner’s Manual...
Communication with another CB station is not authorized on channels Monitoring for Activity 1–8, 31–38, 41–48, and 71–78 within You can monitor a single channel for operational range of a CB repeater any activity, including static and weak Rino 650 Owner’s Manual...
Polling allows another Rino user to http://buy.garmin.com or contact get your location by sending a poll your Garmin dealer. request. • Vox Level—Voice operated • Power Level—adjusts power level transmission controls the sensitivity on frequencies. level of any Vox accessory. Rino 650 Owner’s Manual...
Select oK to save the contact. from your contacts. You can edit and Editing Contacts save favorite notes to quickly send 1. Select Contacts. them later. 2. Select a contact. 3. Select an item. 4. Select Rino 650 Owner’s Manual...
Peer-to-peer is enabled and is ready to transmit Radio Status Description the position Radio -- Radio feature is off The radio is muted Radio 1/2W Transmit power at (page 1/2 watts Rino 650 Owner’s Manual...
100%, select Save. 2. Select a waypoint. For best results, collect four to 3. Select an item to edit. eight samples for the waypoint, waiting at least 90 minutes between 4. Enter the new information. samples. Rino 650 Owner’s Manual...
• To record tracks at a specified about points along the recorded path, time, select time. including time, location, and elevation for each point. 5. Select Recording Interval. 6. Select an option to record tracks more or less often. Rino 650 Owner’s Manual...
Page 16
Plot. 2. Select a saved track. Saving the Current Track 3. Select View on Map. 1. Select track Manager > Current 4. Select Go. track. 2. Select what you want to save: • Select Save track. Rino 650 Owner’s Manual...
POIs near a point on the map, your or compass (page 14). current location, or a waypoint. This may require additional maps, see Stopping Navigation page Select Where to? > Stop Navigation. 1. Select Where to? > Rino 650 Owner’s Manual...
You should calibrate the compass after your destination. moving long distances, experiencing temperature changes, or changing the batteries. 1. From the compass page, touch and hold the middle of the compass. 2. Follow the on-screen instructions. Rino 650 Owner’s Manual...
Page 19
(right or left) from are no major obstacles in your path. the course. The scale refers to the distance ➌ between dots on the course deviation indicator. Rino 650 Owner’s Manual...
Editing the Name of a Route • To remove the point from the 1. Select Route Planner. route, select Remove. 2. Select a route. 6. Select to save the route. 3. Select Change Name. 4. Enter the new name. 5. Select Rino 650 Owner’s Manual...
2. Select a route. 1. Select Man overboard > Start. 3. Select Reverse Route. The map page opens with your route marked with a magenta line. 2. Navigate using the map (page or compass (page 14). Rino 650 Owner’s Manual...
3. Select edit Name. 1. Select Setup > Main Menu. 4. Enter the new name. 2. Select an icon you want to edit. 5. Select 3. Select an option: • Select a new position for the icon. Rino 650 Owner’s Manual...
2. Select the number of data fields to compass, select . display. • For the map, select Setup > Map. Changing the Data Fields Before you can change the map fields, 3. Select a dashboard. you must enable them (page 20). Rino 650 Owner’s Manual...
Global Positioning System with the optional Alkaline battery information from a device pack (page 34). supplying RTCM data in an • Interface—sets the format of the SC-104 format. serial interface: Rino 650 Owner’s Manual...
Calibrating the Touchscreen ◦ track Up—shows your current The screen does not normally require direction of travel toward the calibration. However, if the screen does top of the page. not seem to be responding properly, calibrate the touchscreen. Rino 650 Owner’s Manual...
◦ Auto—allows you to record the Showing more detail may cause tracks at a variable rate to create the map to redraw more slowly. an optimum representation of your tracks. Rino 650 Owner’s Manual...
Select Setup > Position Format. 1. Select Setup > Units. • Position Format—sets the position 2. Select a measurement type. format in which a given location 3. Select a unit of measure for the reading appears. setting. Rino 650 Owner’s Manual...
◦ Variable elevation—the • Go to Line/Pointer—allows you barometer functions while you to select how the course appears. are moving. ◦ Bearing (Small or Large)—the ◦ Fixed elevation—the direction to your destination. barometer functions while you are stationary. Rino 650 Owner’s Manual...
• Found Geocaches—allows you period of time. to edit the number of geocaches found. This number automatically ◦ Ambient Pressure—records increases as you log a find. ambient pressure changes over a period of time. Rino 650 Owner’s Manual...
◦ Distance—routes you to the ◦ on Road For time—calculates next point on the route when on-road routes that require you are within a specified minimal time to drive. distance of your current point. Rino 650 Owner’s Manual...
3. Select on. soundings. Simplifies map 4. Enter a distance. presentation for optimal use while fishing. 5. Select • Appearance—allows you to set the appearance of marine navigation aids on the map. Rino 650 Owner’s Manual...
1. Select Setup > Reset. 2. Select an item to reset. Restoring Default Settings You can reset all the setup values to the original settings. Select Setup > Reset > Reset Defaults to Factory Settings > Yes. Rino 650 Owner’s Manual...
Moon. page • To view the predicted best times for hunting and fishing, select, Hunt and Fish. 2. If necessary, use the arrows to view a different month. 3. Select a day. Rino 650 Owner’s Manual...
2. Select + and - to set the time. 3. Select turn Alarm on. 4. Select an option. The alarm sounds at the selected time. If the device is off at the alarm time, the device turns on and sounds the alarm. Rino 650 Owner’s Manual...
Viewing Device the lithium-ion battery Information pack You can view the unit ID, software Up to 18 hours, version, and license agreement. typical usage using AA batteries (in Select Setup > About. optional Alkaline battery pack) Rino 650 Owner’s Manual...
Alkaline batteries can rupture at high temperatures. Alkaline batteries • Enable battery save mode lose a significant amount of their (page 22). capacity as temperature decreases. Use lithium batteries when operating the device in below-freezing conditions. Rino 650 Owner’s Manual...
Page 38
For more information, go to http://buy.garmin.com or contact your Garmin dealer. 4. Replace the battery cover, and turn the D-ring clockwise. 5. Select Setup > System > Battery type. 6. Select Alkaline, Lithium, or Rechargeable NiMH. Rino 650 Owner’s Manual...
Cleaning the Screen cause permanent damage. 1. Dampen a soft, clean, lint-free cloth with water, isopropyl alcohol, or eyeglass lens cleaner. 2. Wipe the screen with the cloth. 3. Thoroughly dry the screen. Rino 650 Owner’s Manual...
Page 40
Memory cards can be used for bottom of the device to lock it. additional storage. Also, some maps are available preloaded on memory 6. Replace the battery pack, and turn cards. Go to http://buy.garmin.com the D-ring clockwise. more information. Rino 650 Owner’s Manual...
Page 41
1. Browse your computer for the file. 2. Select the file. 3. Select edit > Copy. ➊ 4. Open the “Garmin” or memory card drive/volume. tIP: You must put photo files in the Garmin\JPEG folder. You must put geocache files in the Garmin\GPX folder.
Before you can delete files, you must connect the device to your computer (page 37). 1. Open the “Garmin” drive or volume. 2. If necessary, open a folder or volume. 3. Select the files. Rino 650 Owner’s Manual...
Page 43
5. Customize your data fields to view from your Garmin dealer. the heart rate or cadence data (page 40). Optional Fitness Accessories Before you can use the fitness accessory with your device, you Rino 650 Owner’s Manual...
Page 44
Ascent - The maximum ascent process occurs automatically when Maximum rate in meters (or feet) you turn on the Garmin device and per minute only takes a few seconds when Ascent - Total The total elevation the accessories are activated and distance ascended functioning correctly.
Page 45
Descent - The maximum route Maximum descent rate in meters Glide Ratio The ratio of horizontal (or feet) per minute distance traveled to Descent - Total The total elevation the change in vertical distance descended distance Rino 650 Owner’s Manual...
Page 46
Maximum reached since last selected settings reset Location Displays the current Speed - The average speed (selected) position in the Moving Avg of the device while selected position moving since last format reset Rino 650 Owner’s Manual...
Page 47
A running tally of day based on your Total distance traveled time settings (format, since the last reset time zone, and daylight saving time) Time to The estimated time Destination needed to reach your final destination Rino 650 Owner’s Manual...
Page 48
Vertical Speed Your rate of altitude gain or loss over time Waypoint at The last point on Dest a route to your destination Waypoint at The next point on Next your route Rino 650 Owner’s Manual...
1 Leave the device on until the battery runs out not seem accurate 2 Fully charge the battery without interrupting the charge cycle The batteries do not To learn how to maximize the battery life, see page last long Rino 650 Owner’s Manual...
Page 50
Windows may have trouble assigning drive my list of drives letters to your Garmin drives See the help file for your operating system to learn how to assign drive letters I need replacement Go to http://buygarmincom, or contact your Garmin...
Page 52
GPS signals 3, 40, 42, 45 icons to geocaches system settings scanning to waypoints set up tracks status indicators with bearing pointer heading settings recording 11, 23 with course pointer headset registering your device north up HomePort Rino 650 Owner’s Manual...
Page 53
Tracback creating satellite signals 3, 40, tracks deleting 42, 45 clearing current editing system settings deleting navigating to scanlist navigating setting up recording 11, 23 Sight ‘N Go saving zoom software setup updating viewing Rino 650 Owner’s Manual...