Washing; Wash Programmes; Automatic Programme - Electrolux DIVA 60 cm Service Manual

4 WASHING

4.1 Wash programmes

Programme
I2 Intensive (maximum speed)
I3 Short Intensive
N2 Normal (maximum speed)
N3
N4 Delicate without prewash
N5 Normal 3 rinses
Normal 3 rinses
N6
without prewash
E1 Axx Energy label
E4 Fast Energy label
Auto performance
E5
Energy label
Auto Auto 50-65°C
Q1
Q4
Q5 Short 30 min
Q6 Heat plates
Q7 Glassware
NB: The number and types of wash programmes vary with the configuration of the model.
4.1.1

Automatic programme

Turbidity sensor
Some models fitted with a turbidity sensor can be equipped with a special
"Automatic" programme that optimises the cycle to compensate for the quantity of
dishes loaded and the amount of dirt on them. The sensor is located on the outside of
the sump and directly contacts the water.
The NTC sensor that controls wash water temperature and the infrared
turbidity sensor that checks the turbidity of the water (and thus the amount of dirt
deposited on the dishes) are contained in a single component.
Detection of dirtiness
The degree of turbidity is measured during the cold prewash.
A LED powered by the main board (connector H5) projects a beam of light at a photo receiver.
In the photo receiver circuit (connector H6 on the main board), a current circulates that is proportional to
the amount of light received (and is thus inversely proportional to the degree of turbidity).
The microprocessor measures the signal in the circuit and determines the most appropriate cycle for
the amount of dirt dissolved in the water.
Delicate
Short
Soak
55 68 2
50 68 2
--
68 1
--
55 1
--
55 1
--
68 2
--
68 2
-- 60 max 1
--
55 max 1
--
65 max 1
--
50-68 1
-- 50 1
--
-- --
-- 65 max --
--
-- --
--
45 1
11
Possible options
☺ ☺ ☺ ☺
☺ ☺ ☺ ☺ ☺
☺ ☺ ☺ ☺
☺ ☺ ☺ ☺ ☺
☺ ☺ ☺ ☺ ☺
☺ ☺ ☺ ☺ ☺
☺ ☺ ☺ ☺ ☺
☺ ☺ ☺ ☺ ☺ ☺ ☺
☺ ☺ ☺ ☺ ☺
☺ ☺ ☺ ☺ ☺ ☺ ☺
☺ ☺ ☺ ☺
☺ ☺ ☺ ☺ ☺
♦ ♦ ♦
☺ ☺ ☺ ☺ ☺
♦ ♦ ♦
☺ ☺ ☺
Min. ~
♦
☺
120'
♦
88'
♦
☺
100'
♦
☺
98'
♦
☺
89'
♦
☺
102'
♦
☺
93'
162'
♦
☺
134'
141'
♦
☺
92'-115'
52'
12'
31'
30'
♦
☺
71'