Setting the One push PF function to On
You can press the shutter release button all the way down (single step)
without pressing the button halfway to shorten the shutter delay. Set the
4
"One push PF" in the [A Rec.Mode] menu to on to use the One push PF
function.
The One push PF function allows you to release the shutter at the right
moment. The pictures are taken as deep-focus (pan focus) shots.
1
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [One push PF].
3
Use the four-way controller (45)
to select [O (On)/P (Off)].
The camera is ready for taking pictures.
The One push PF function works only when Focus Mode is
Standard (Autofocus) and One push PF in the [A Rec.Mode] menu
is set to On.
114
Shutter release
button
MENU
Four-way
controller
MENU button
Rec. Mode
Recorded Pixels
12
M
Quality Level
White Balance
AWB
AF Setting
AE Metering
Sensitivity
AUTO 800
MENU
Exit
Rec. Mode
D-Range Comp. Off
One push PF
Memory
Green Button
Sharpness
Saturation
Exit
MENU