Table of Contents
Advertisement
Messages
Messages such as the following may appear on the LCD monitor during
camera operation.
Message
Shake Reduction is OFF The Shake Reduction preview button is pressed when
Compression error
No image/sound
Memory card full
Built-in memory full
Image/sound cannot be
created
Memory card error
Card not formatted
Card locked
Data being recorded
Data being processed
Deleting
[Shake Reduction] is set to Off on the [
menu. Set it to On. (p.110)
Compression of the image you captured has failed. Change
the quality/size and try again.
There are no images/sounds on the SD Memory Card or in
the built-in memory.
The SD Memory Card or the built-in memory is full and no
more images can be saved.
Insert a new SD Memory Card or delete unwanted images.
(p.23, 137)
Change the quality/size and try again. (p.153)
You can only record up to 10,000 files due to the
specifications of the camera, even when using a large
volume SD Memory Card. Delete unwanted files to continue
recording.
Shooting and playback are impossible due to a problem
with the SD Memory Card. You may be able to play back
the images or sounds on a PC.
The SD Memory Card you have inserted is unformatted or
has been formatted on a PC or other device and is not
compatible with this camera. (p.174)
The SD Memory Card is write-protected. Only menu
operation and mode change are possible.
This is displayed when you switch to Playback mode while
the image is being saved or protect setting or DPOF
settings are being saved. The message disappears when
saving of an image or setting is completed.
The image is being recorded on the SD Memory Card or in
the built-in memory.
The protect setting or DPOF settings are being changed.
The movie is being recorded.
The image is being processed with digital filter.
The movie is being edited.
The SD Memory Card or built-in memory is being formatted.
The image or sound is being deleted.
Description
A
Rec.Mode]
8
197
Advertisement
Table of Contents
