Table of Contents
Advertisement
Taking Pictures in Frame Composite mode
You can take pictures with a decorative frame added using the Frame
Composite function. There are three frames already stored in the
camera.
1
Press the four-way controller (3) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
(2345) to select Y
(Frame Composite).
3
Press the OK button.
The frame selection screen appears.
4
Use the four-way controller (45)
to select a frame.
5
Press the OK button.
The subject appears in the selected frame.
6
Press the shutter release button
halfway.
The focus frame on the LCD monitor will
light green when the camera is in focus.
Shutter release button
Four-way controller
OK button
Green button
Frame Composite
Cancel
MENU
Select the frame
Select the frame
Select the frame
for composite
for composite
for composite
Change
Change
Change
4
OK
OK
OK
OK
OK
OK
2
2
01/15/2008
01/15/2008
01/15/2008
12:00
12:00
12:00
81
Advertisement
Table of Contents
