Trimmer Safety Warnings; Transportation And Storage - Ryobi RLT254CDSO User Manual

● leaving the product unattended
● cleaning the product
● changing accessories
● clearing blockages
● checking for any damage after hitting an object
● checking for any damage if the product starts to
vibrate abnormally
● performing maintenance
WARNING
Never use cutting means or attachments which are not
specifi ed by Ryobi in this manual. This includes the
use of metal multi-piece pivoting chains and fl ailblades.
These items are known to break up during use and
present a high risk of serious injury to the operator or
bystanders.
WARNING
Inspection after dropping or other impacts:
Thoroughly inspect the product and identify any
affections or damage with it. Any part that is damaged
should be properly repaired or replaced by an
authorised service centre.

TRIMMER SAFETY WARNINGS

■ Replace string head if cracked, chipped, or damaged
in any way. Be sure the string head or blade is properly
installed and securely fastened. Failure to do so can
cause serious injury.
■ Avoid using on wet grass.
■ Do not walk backwards when using the product.
■ Walk, never run.
■ The small blade fitted to the cutting attachment guard
is designed to trim the new extended line to the correct
length, for a safe and optimum performance. It is very
sharp, do not touch it particularly when cleaning the
tool.
■ Always ensure that ventilation openings are kept clear
of debris.
■ Before use and after any impact, check that there
are no damaged parts. Examine the cutting means
for signs of cracking or other damage. A defective
switch or any part that is damaged should be properly
repaired or replaced by an authorized service facility.
■ Make sure the head attachment is properly installed
and securely fastened.
English (Original instructions)
■ Make sure all guards, deflectors and handles are
■ Do not modify the machine in any way, this may
■ Use only the manufacturer's replacement line in the
■ Never operate the product without the cutting
■ Maintain a firm grip on both handles while using the

TRANSPORTATION AND STORAGE

■ Stop the product and allow it to cool down before
■ Clean all foreign material from the product.
■ Drain all fuel from tank into a container approved for
■ Run the engine until it stops. This will remove all
■ Store it in a cool dry and well-ventilated place that is
■ When transporting the product, secure it against
■ Never carry or transport the product while it is running.
■ Abide by all government and local regulations for the
Short term storage
■ Stop the machine and allow it to cool before storing
■ Clean all foreign material from the product.
■ Store it in a cool dry and well-ventilated place that is
■ Keep away from corrosive agents such as garden
■ Do not store outdoors.
18 18
properly and securely attached.
increase the risk of injury to yourself or others.
cutting head. Do not use any other cutting attachment.
attachment guard in place and in good condition.
product. Keep the trimmer head below waist level.
Never cut with the string head located over 76 cm or
more above the ground.
storing or transporting.
petrol. Remember to properly replace and tighten the
fuel mix cap.
lubricant mix that could become stale and leave
varnish and gum in the fuel system.
inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
movement or falling to prevent injury to persons or
damage to the product.
safe storage and handling of petrol.
or transporting.
inaccessible to children.
chemicals and de-icing salts.
fuel-