Shifting; Downshifting - Jeep WRANGLER 2017 Owner's Manual

Shifting

Fully press the clutch pedal before shifting gears. As you
release the clutch pedal, lightly press the accelerator pedal.
You should always use first gear when starting from a
standing position.
Recommended Vehicle Shift Speeds
To utilize your manual transmission efficiently for both
fuel economy and performance, it should be upshifted as
Engine Speeds
3.6L Accel.
Cruise
NOTE: Vehicle speeds shown in the chart above are for 2H
and 4H only, vehicle speeds in 4L would be significantly
less.

Downshifting

Moving from a high gear down to a lower gear is recom-
mended to preserve brakes when driving down steep hills.
In addition, downshifting at the right time provides better
acceleration when you desire to resume speed. Downshift
Manual Transmission Shift Speeds in MPH (KM/H)
1 to 2 2 to 3
15 (24) 24 (39)
10 (16) 19 (31)
listed in recommended shift speed chart. Shift at the
vehicle speeds listed for acceleration. When heavily loaded
or pulling a trailer these recommended up-shift speeds
may not apply.
3 to 4
34 (55)
27 (43)
progressively. Do not skip gears to avoid overspeeding the
engine and clutch.
WARNING!
Do not downshift for additional engine braking on a
slippery surface. The drive wheels could lose their
grip, and the vehicle could skid.
STARTING AND OPERATING 289
4 to 5 5 to 6
47 (76) 56 (90)
37 (60) 41 (66)
6