Jump-Starting; Preparations For Jump-Start - Jeep WRANGLER 2017 Owner's Manual

Hide thumbs Also See for WRANGLER 2017:
Table of Contents

Advertisement

nut has been tightened twice. For the correct lug nut
torque refer to "Torque Specifications" in "Technical
Specifications". If in doubt about the correct tightness,
have them checked with a torque wrench by your
authorized dealer or service station.
5. After 25 miles (40 km) check the lug nut torque with a
torque wrench to ensure that all lug nuts are properly
seated against the wheel.

JUMP-STARTING

If your vehicle has a discharged battery, it can be jump-
started using a set of jumper cables and a battery in another
vehicle, or by using a portable battery booster pack.
Jump-starting can be dangerous if done improperly, so
please follow the procedures in this section carefully.
WARNING!
Do not attempt jump-starting if the battery is frozen. It
could rupture or explode and cause personal injury.
CAUTION!
Do not use a portable battery booster pack or any other
booster source with a system voltage greater than 12
Volts or damage to the battery, starter motor, alternator
or electrical system may occur.
NOTE: When using a portable battery booster pack, follow
the manufacturer's operating instructions and precautions.

Preparations For Jump-Start

The battery in your vehicle is located in the right rear of the
engine compartment, behind the Power Distribution Cen-
ter.
IN CASE OF EMERGENCY 355
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrangler 2017

Table of Contents