Jeep WRANGLER 2017 Owner's Manual page 479

Answer Or Reject An Incoming Call — No Call
Currently In Progress
When you receive a call on your mobile phone, the
Uconnect Phone will interrupt the vehicle audio system, if
on, and will ask if you would like to answer the call. Push
the Phone button to accept the call. To reject the call,
push and hold the Phone
single beep, indicating that the incoming call was re-
jected.
Answer Or Reject An Incoming Call — Call
Currently In Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
mobile phone. Push the Phone
current call on hold and answer the incoming call.
NOTE: The Uconnect Phone compatible phones in the
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.
button until you hear a
button to place the
Making A Second Call While Current Call Is In
Progress
To make a second call while you are currently on a call,
push the Voice Command
"Call" followed by the phone number or phonebook
entry you wish to call. The first call will be on hold
while the second call is in progress. To go back to the
first call, refer to "Toggling Between Calls" in this
section. To combine two calls, refer to "Conference Call"
in this section.
Place/Retrieve A Call From Hold
To put a call on hold, push the Phone
hear a single beep. This indicates that the call is on hold.
To bring the call back from hold, push and hold the
Phone button until you hear a single beep.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
push the Phone button until you hear a single beep,
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at a
time.
MULTIMEDIA 477
button and say "Dial" or
button until you
10