Jeep WRANGLER 2017 Owner's Manual page 192

190 GETTING TO KNOW YOUR INSTRUMENT PANEL
Elapsed Time
Shows the total elapsed time of travel since the last reset.
Elapsed time will increment when the ignition switch is in
the RUN or START position.
Elapsed time displays Minutes: Seconds.
After 59 minutes: 59 seconds have elapsed, Hours will be
displayed before Minutes.
Elapsed time can be reset by pushing and holding the right
arrow button (as prompted in the instrument cluster dis-
play). Upon reset, all digits will change to zeros and time
will start again if the ignition switch is in RUN or START.
Vehicle Information
Push and release the MENU button until "Vehicle Infor-
mation" displays in the instrument cluster display. Then,
push the down arrow button to display any one of the
following choices:
• Coolant Temperature
Shows the actual coolant temperature.
• Oil Pressure
Shows the actual oil pressure.
• Transmission Temperature — Automatic Transmission
Only
Shows the actual transmission fluid temperature.
• Oil Life Remaining (Automatic Oil Change Indicator)
— If Equipped
Shows the oil life measured in percentage.
Units Selection (UNITS IN Display)
Displays the units used for the Outside Temperature,
Average Fuel Economy and Distance to Empty features.
Push and release the down arrow button to toggle units
between U.S. and METRIC.
System Warnings
Displays "SYSTEM OK" if there are no active Warning
Messages stored. Pushing and releasing the down arrow
button when "SYSTEM OK" is displayed will do nothing.
Displays "SYSTEM WARNINGS PRESENT" if there are
active Warning Messages stored. Pushing and releasing the
down arrow button when "SYSTEM WARNINGS PRES-
ENT" is displayed will display each stored warning for
each button push. Push and release the MENU button to
return to the Main Menu.