Panasonic CF-72 Series Reference Manual page 65

Setup Utility
Boot Menu
Floppy Drive*
Hard Disk
CD Drive*
LAN
The default order is as follows:
[Floppy Drive]
To move a device up by one in the order, select the device with
To move a device down by one in the order, select the device with
NOTE
Boot First Menu
The device for starting up the Operating System can also be selected during computer start-up.
After the computer is turned on, the device selection display will appear when
pressed while "Press <ESC> to enter Boot First Menu" is shown.
When the setting of the [Boot] menu is changed, the selection screen display will also change.
Exit Menu
Save Values & Exit
Exit Without Saving Changes
Get Default Values
Load Previous Values
Save Current Values
Refresh Battery
Parameters
Save Values & Exit
Exit Without Saving Changes
Get Default Values
Load Previous Values
Save Current Values
Refresh Battery
1
*
2
*
[Hard Disk] [CD Drive]
Exit the Setup Utility and save your
changes to CMOS.
Exit the Setup Utility without saving your
changes to CMOS.
Set the default settings. The password
remains.
This item may not be displayed when
starting up the Setup Utility with the User
Password.
Load previous values from CMOS for all
Setup items.
Save your changes to CMOS.
Refreshing the battery
( page 31)
1 This item is shown even when the floppy disk drive is not in-
stalled or [Floppy Operation] is set to [Disable].
2
The description for "CD Drive" applies to the DVD-ROM drive,
CD-ROM drive, CD-R/RW drive and DVD-ROM & CD-R/RW drive.
[LAN].
and ,and then press F6 .
and ,and then press F5 .
ESC is
65