Panasonic CF-72 Series Reference Manual page 15

Standby/Hibernation Functions
Shutting Down Using the Standby or Hibernation Function
The computer should be set for either the standby or hibernation function.
( page 14)
Slide the power switch; at the "beep*
(After releasing your finger from the
power switch, do not touch the power
switch until the power indicator goes off
or blinks.)
CAUTION
1
At the "beep* " sound, release your finger from the power switch. If you continue
to slide the switch and hold it for more than four seconds, the computer will emit a
1
second "beep* " then power off. Data not previously saved will be lost.
Windows 98 Windows 2000
Even when [When I press the power button on my computer] is set to [Shut-
2
down]* with [Control Panel] - [Power Management]*
for more than four seconds and do not release it, a second "beep*
the computer will power off, although the computer will not completely shut down.
* 1 When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the
Setup Utility ( page
sound.
* 2 Windows 2000 :[Power Off]
* 3 Windows 2000 :[Power Options]
NOTE
With the method below, you can shut down the computer by using the hiberna-
tion function.
• Fn + F10 (
• • Windows 2000
In [Start] - [Shut Down], select [Hibernate].
• • Windows NT
In [Control Panel] - [APM 2.0 for NT] - [Power Control], select [Click Here to
Suspend]. ( page
Windows 98 Windows 2000
With the method below, you can shut down the computer by using the standby
function.
• Fn + F7 (
• In [Start] - [Shut Down], select [Stand by].
1
" sound, release your finger.
61) or by the key combination
page 3)
26)
page 3)
Standby Mode
or
Hibernation Mode
3
, if you slide the power switch
1
" will sound and
Fn + F4 , there will be no beep
15