Panasonic CF-72 Series Reference Manual page 42

PC Cards
Label-side up
Installing/Removing PC Cards
Installing PC Cards
Slide the PC Card in until it snaps into place. Refer to the operation manual
of each card on how to install the card (insertion is typically label-side up).
CAUTION
In the case of a PC Card to connect a peripheral device (SCSI,
IEEE 1394, etc.), first connect the peripheral device to the card, and
then insert the card after switching ON the device.
When inserting a card, do not force the card in if difficulty is encoun-
tered. You may damage the slot, making it impossible to remove the
card.
Removing PC Cards
CAUTION
Do not remove a PC Card while your computer is in the standby or
hibernation mode.
When two PC Cards are inserted, perform the following procedure
(from Step
Double-click
the PC Card, then select [Stop].
Follow the on-screen instructions.
(When the PC Card has been removed after the computer is turned
off, this step is not necessary.)
Press the button, and then press the button again.
Slide the PC Card out.
to Step ) for each of the two cards.
( : ) on the taskbar and then select
Windows 2000
42