Panasonic CF-72 Series Reference Manual page 43

PC Cards
PC Card Utility Program
Windows NT
About Phoenix Card Executive™ 2.0 for Windows NT
When using a Windows NT
®
Windows NT is installed. When [Card Executive 2.0 for NT] is displayed in the [Con-
trol Panel], this indicates that the program is installed.
If Phoenix Card Executive
®
disk or Windows NT Service Pack has been reinstalled, reinstall Phoenix Card
TM
Executive 2.0 for Windows NT
1
Select [Start] - [Run].
2
Input [c:\util\drivers\pccard\setup.exe] and then select [OK], then follow the on-screen
instructions.
NOTE
Do not use the Control Panel Icon labeled [PC Card (PCMCIA)]. This Control
Panel will no longer function.
Instead, use the Control Panel Icon labeled [Card Executive 2.0 for NT] when
checking on the status of the PC Cards in your system.
®
model, confirm that Phoenix Card Executive™ 2.0 for
TM ®
2.0 for Windows NT has been uninstalled, or the hard
®
.
43
®